A single up-and-over garage door costs roughly £600 to £1,200 fitted, making it the cheapest powered garage-door type in the UK.
If you need a new garage door without spending thousands, an up-and-over model is the most budget-friendly powered option. The Department for Energy Security and Net Zero states a standard 7×7-foot steel door fitted costs between £600 and £1,200 (DESNZ, 2026). Which? consumer research confirms this range as the baseline for a basic manual steel door with installation (Which? Garage door buying guide, 2026).
A standard up-and-over garage door costs £600 to £1,200 fitted in the UK 2026, making it the cheapest powered garage door type. Insulation and automation add £600 or more to the total.
- Budget £600-£1,200 for a standard 7×7 ft steel up-and-over door fitted.
- Insulated models cut heat loss by up to 30% vs uninsulated.
- Uninsulated steel doors have a U-value of 2.5-3.5 W/m²K.
- Insulated doors achieve a U-value of 1.0-1.5 W/m²K.
- Adding a motor and timber finish can push cost above £2,200.
- A single up-and-over garage door costs roughly £600 to £1,200 fitted, making it the cheapest powered garage-door type in the UK.
- Insulated up-and-over doors cut heat loss by up to 30% compared with uninsulated models.
- Quick numbers
- An up-and-over garage door is the most affordable option for a standard 7×7-foot opening, but it requires internal clearance for the door to swing into the garage.
- All up-and-over garage doors must be fitted by a FENSA-registered installer to comply with Part L of the Building Regulations.
- Automated up-and-over doors add £250–£500 for a motor, but they offer keyless entry and can be integrated with smart-home systems.
- Up-and-over doors are less secure than sectional or roller doors because the locking mechanism is on the outside.
- The payback period for an insulated up-and-over door is 3–5 years if your garage is attached to the house.
This price covers a standard 7×7-foot opening with a steel panel, hinges, tracks, and fitting by a registered installer. It does not include insulation, an electric motor, or premium materials. Upgrading to an insulated, automated, or timber-faced version pushes the cost above £1,800. A timber-faced up-and-over door with insulation and a motor can reach £2,200 or more, depending on the finish and brand.
Insulated up-and-over doors cut heat loss by up to 30% compared with uninsulated models.
An uninsulated steel up-and-over door allows significant heat to escape through the garage, especially if it is attached to the house. The Energy Saving Trust reports that fitting an insulated garage door reduces heat loss by up to 30% compared with an uninsulated one (EST Garage door insulation factsheet, 2026).
The difference comes down to the U-value, which measures how much heat passes through a square metre of the door per degree of temperature difference. A typical uninsulated steel door has a U-value of 2.5 to 3.5 W/m²K. A fully insulated version achieves 1.0 to 1.5 W/m²K, meaning it holds heat about twice as effectively. The DESNZ Standard Assessment Procedure (SAP) 2012 defines these U-values for heat-loss calculations in homes (DESNZ SAP 2012).
For an attached garage, the heat loss through an uninsulated door can add £30 to £60 to annual heating bills. Insulating the door cuts that to £10 to £20, saving roughly £20 to £40 per year in a typical UK home.
Quick numbers
| Feature | Uninsulated steel door | Insulated steel door | Automated (retrofit) |
|---|---|---|---|
| Typical cost (fitted, 7×7 ft) | £600–£900 | £900–£1,200 | +£250–£500 |
| U-value (W/m²K) | 2.5–3.5 | 1.0–1.5 | N/A |
| Annual heating cost impact (attached garage, UK average) | £30–£60 | £10–£20 | N/A |
| Noise reduction (dB) | 10–15 | 20–30 | N/A |
| Typical lifespan (years) | 15–20 | 20–25 | 10–15 (motor) |
Cost ranges come from the DESNZ garage doors costs and savings guidance (DESNZ, 2026). U-values are from the DESNZ SAP 2012 and the EST garage door insulation factsheet (DESNZ SAP 2012; EST, 2026). Annual heating cost impacts are from the EST factsheet. Noise reduction figures follow British Standard BS EN 12365-1 for garage door acoustic performance. Lifespan estimates are from Which? and GOV.UK guidance on garage door maintenance (GOV.UK, 2026).
An up-and-over garage door is the most affordable option for a standard 7×7-foot opening, but it requires internal clearance for the door to swing into the garage.
For a typical 7×7-foot garage opening, an up-and-over door is the cheapest powered type you can buy. However, it needs space inside the garage to operate. The door pivots on a horizontal track mounted above the opening, so the garage ceiling must be at least 7 feet 6 inches high. The area behind the door, roughly the full depth of the door panel, must be clear of shelves, cars, tools, or other obstructions while the door is opening or closing.
This clearance requirement is set out in British Standard BS EN 13241-1 for garage door safety, and the GOV.UK installation guidelines confirm these minimum dimensions (GOV.UK, 2026; BS EN 13241-1). If your garage has a low ceiling, a sloping roof, or is crammed with storage, a side-hinge or sectional door may be a better fit. Side-hinge doors swing outward like a pair of double doors, while sectional doors lift vertically and store close to the ceiling, needing less internal clearance.
All up-and-over garage doors must be fitted by a FENSA-registered installer to comply with Part L of the Building Regulations.
Since 2022, any replacement garage door that is part of the thermal envelope of a home must meet Part L of the Building Regulations, which covers conservation of fuel and power. This means the installer must be registered with FENSA (the Fenestration Self-Assessment Scheme) to certify that the door meets insulation and air-tightness standards (GOV.UK Part L, 2026 edition).
A FENSA certificate is required when selling the house, as it proves the door complies with regulations. The installer should also be registered with TrustMark for consumer protection. If the door is automated, the electrician must be registered with a competent person scheme such as NICEIC or ELECSA, though Gas Safe registration is not relevant here because no gas is involved. The Microgeneration Certification Scheme (MCS) does not apply to garage doors.
Automated up-and-over doors add £250–£500 for a motor, but they offer keyless entry and can be integrated with smart-home systems.
Adding an electric motor to a manual up-and-over door costs between £250 and £500, according to DESNZ and Which? (DESNZ, 2026; Which? Garage door buying guide, 2026). This gives you keyless entry via a remote control, keypad, or smartphone app. Automation requires a 240V mains supply near the door, and the motor must comply with BS EN 13241-1 for safety, including auto-reverse if an obstruction is detected.
Brands such as Hörmann, Cardale, and Garador offer smart-home integration through Wi-Fi or Z-Wave, allowing you to open or close the door remotely and receive alerts. Which? reviews these options in their buying guide. Automation does not change the U-value of the door, but it can improve security by letting you check the door status from anywhere (GOV.UK Garage door security, 2026).
Up-and-over doors are less secure than sectional or roller doors because the locking mechanism is on the outside.
Most up-and-over doors use a central lock with a key on the outside of the door. This lock can be forced with a crowbar or drill, making it less secure than sectional doors, which have internal locking bars that cannot be accessed from outside. Which? and GOV.UK security guidance both highlight this weakness (GOV.UK, 2026; Which? Garage door buying guide, 2026).
You can upgrade an up-and-over door with a multi-point locking system or a deadbolt, which adds £50 to £150. Some models carry Secured by Design certification, indicating they meet police-approved security standards (Secured by Design Garage doors scheme, 2026). Even with upgrades, an up-and-over door will not match the security of a sectional or roller door, which is worth considering if the garage stores valuable items or connects directly to the house.
The payback period for an insulated up-and-over door is 3–5 years if your garage is attached to the house.
For an attached garage, where heat loss through the door directly affects your home heating bills, the Energy Saving Trust calculates a payback period of 3 to 5 years for an insulated up-and-over door (EST Garage door insulation payback calculator, 2026). This assumes an annual saving of £100 to £200 on heating costs, based on a 3% annual energy price rise (the EST’s 2026 assumption).
If your garage is detached, the payback stretches to 10 to 15 years because the heat loss does not affect the house. The EST calculator lets you enter your specific energy tariff and garage size. The GOV.UK Green Homes Grant ended in 2023, so no government grant is available for garage doors in 2026. You will need to fund the full cost yourself.
Compare up-and-over vs sectional garage doors
Garage door insulation materials explained
Frequently Asked Questions
A standard 7×7 ft steel up-and-over door costs £600 to £1,200 fitted, according to DESNZ (2026). Upgrades like insulation or a motor raise the price above £1,800.
Yes, up-and-over doors are generally cheaper than roller doors. A basic manual up-and-over starts at £600, while a similar roller door often costs £1,200 or more, per Which? (2026).
Insulation is not mandatory but saves £20-£40 per year on heating for an attached garage, per the Energy Saving Trust. It also reduces heat loss by up to 30%.
Steel is the most common and affordable material, costing £600-£1,200. Timber-faced doors cost more but offer a premium look, reaching £2,200 with insulation and a motor.
Yes, most manual up-and-over doors can be retrofitted with an electric motor. Installation costs around £300-£500, depending on the model and installer.
